Study your flashcards anywhere!

Download the official Cram app for free >

  • Shuffle
    Toggle On
    Toggle Off
  • Alphabetize
    Toggle On
    Toggle Off
  • Front First
    Toggle On
    Toggle Off
  • Both Sides
    Toggle On
    Toggle Off
  • Read
    Toggle On
    Toggle Off
Reading...
Front

How to study your flashcards.

Right/Left arrow keys: Navigate between flashcards.right arrow keyleft arrow key

Up/Down arrow keys: Flip the card between the front and back.down keyup key

H key: Show hint (3rd side).h key

A key: Read text to speech.a key

image

Play button

image

Play button

image

Progress

1/10

Click to flip

10 Cards in this Set

  • Front
  • Back
  • 3rd side (hint)
Supply piping for hazardous production materials having a health hazard ranking of 3 or 4 shall have ____ connections.



(A) soldered


(B) brazed


(C) threaded


(D) welded

(D) welded

1406.3.2

A continuous gas-monitoring system shall be provided when dispensing occurs, and flammable gases or vapors may be present in quantities in excess of __ percent.



(A) 5


(B) 15


(C) 20


(D) 25

(C) 20

1406.3.3

This process piping inspection shall include a determination that the piping size material and installation meet the requirements of this code ____ inspection.



(A) final piping


(B) excavation


(C) rough piping


(D) special

(C) rough piping

1405.2.2

Straining or bending pipe is an acceptable method of installing process piping ______.



(A) provided it is low-pressure piping


(B) only if the piping is clamped secured every 3 feet


(C) anytime


(D) process piping shall not be bent or strained

(D) process piping shall not be bent or strained

1404.1

Excavations required for the installation of underground process piping shall be kept open until _____.



(A) all underground piping is installed


(B) it has been inspected and approved by the Authority Having Jurisdiction


(C) it has been tested


(D) all expansion of the pipe has taken place

(B) it has been inspected and approved by the Authority Having Jurisdiction

1405.1

Process piping being hydraulically tested must be tested at not less than ______.



(A) 100 psi


(B) 100 percent of operating pressure


(C) one and one-half times the maximum operating pressure (D) twice the maximum operating pressure

(C) one and one-half times the maximum operating pressure

1405.2.2

When testing a process piping system with air, the pressure must be at least ______.



(A) 100 psi


(B) 100 percent of the maximum operating pressure (C) 110 percent of the maximum operating pressure (D) twice the maximum operating pressure

(C) 110 percent of the maximum operating pressure
1405.2.2
Test pressure shall be held for a length of time acceptable to the Authority Having Jurisdiction but in no case for less than ____.



(A) 15 minutes


(B) 30 minutes


(C) 1 hour


(D) 24 hours

(B) 30 minutes

1405.2.2

All liquid HPP waste or drainage shall be installed in accordance with the _____.



(A) NFPA codes


(B) Plumbing Code


(C) Building Code


(D) Fire Code

(B) Plumbing Code

1406.2

In addition to the requirements of the code, HPP gases shall also comply with ______.



(A) the Building Code


(B) the Fire Code


(C) Utility Codes


(D) Building Standards

(B) the Fire Code

1406.3